The golf equipment maker recently boosted productivity for custom-fit clubs with a new automated molding cell at its Phoenix, Arizona, facility.

Designed for a wide range of materials: the integrated, automated production cells built around a servo-hydraulic SmartPower injection molding machine. Photo Credit: Wittmann Group
Golf equipment maker Ping recently boosted productivity for custom-fit clubs with a new automated molding cell at its Phoenix, Arizona, facility that incorporates a range of equipment from Wittmann, including a servohydraulic SmartPower injection molding machine with linear three axis robot W808, a Tempro plus D temperature control unit, and a S-Max granulator.
The operation also progressed from a four-cavity mold to an eight-cavity mold, said Steve Jeffries, senior molding engineer at Ping. With this new combination, Ping has doubled output with virtually lights-out production and even eliminated a second work shift. Now, Jeffries said, one operator can run two machines at a time.
Previously, more operators were required to trim parts by hand; it would take two to three operators to keep up with the press’s output. “Prior to adding this work cell, the parts were hand-trimmed and the runner was scrapped, not reground,” Jeffries said. “The shot-to-shot repeatability is valuable in reducing defective parts. We utilize 40 per cent regrind and still get good shot-to-shot accuracy.”
The new cell builds on the relationship between Austria-based Wittmann and Ping – which goes back to the mid-1990s – by solving the problem of Ping using oversized presses, with shot sizes and tonnage exceeding its requirements. “After conducting a detailed analysis of our product mix, I identified the optimal press sizes for our operations,” Jeffries said. “Wittmann not only optimized the injection molding machine and work cell parameters but also provided a training expert who dedicated nearly a week to working with our operators.”
Ping processes a diverse range of materials, including polypropylene, ABS, and polyamide. “Our weighted parts require custom blends,” Jeffries said. “We run a lot of heavily filled materials, and this requires equipment with excellent wear properties. The use of regrind depends on the part and the material, he continued. “Some are more forgiving than others, like polypropylene,” Jeffries said. “You can virtually process 100 per cent regrind. But with the TPUs, you have to keep it at a lower percent blend to prevent degradation. I’ve implemented this new program to address the significant amount of scrap we were generating. We’re probably saving about 75 per cent of what previously went straight to the landfill.”
At its Phoenix facility, seven of Ping’s nine injection molding machines – ranging from 22 to 300 tons – are from Wittmann.