Hey guys and gals,
This is Hole 4 – Par 3 of the Lake Wabasca 2, playing from 3rd tee for the Lakefront Links 9-Hole cup.
⛳ Play your best game by signing up to Patreon: https://www.patreon.com/golfclashtommy
─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─
MEMBER: https://www.youtube.com/channel/UCUKgC5od0_VWyn4ztkevO0Q/join
🌐 – https://www.golfclashtommy.com
─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─
❓ Support email, support@golfclashtommy.com
💼 Business email, business@golfclashtommy.com
👍 Facebook group: https://www.facebook.com/groups/1890300437667303/
👍 Facebook page: https://www.facebook.com/teamgolfclashtommy/
👕Check out our new store!! https://streamlabs.com/golfclashtommy/#/merch
on hold number four this is a harder part three than what it looks and the reason for that is the wind direction I will explain at the end of the video why so I’m starting with a P5 ball at complete um max line with my beginner driver in the ring to be by the rough line then I’m swapping to the Rock and then a ball that you have Sid spin five any power Zer plus um and win five obviously we’re going to push the Rings here and this is the most left angle which is what I would classify as the red angle here we’re going to do Circle break overpower plus one click so to the reason to uh why this one um is more difficult than what it looks is due to the wind direction as I said from the start and that is because I cannot pull or push my rings in from certain spots which means that I would would have to just go completely blind looking for an aim point so in the end I decided I tried to go higher up I tried to get uh go further back try to find different ways of setting this one up where we do either have a midline or we do have a max line and this in the end comes in lovely unfortunately we’re going to have to push the Rings but um we’re going to see our having a very good chance for an hole in one if we do push properly adjust is going to be uh one to one always
1 Comment
Would be helpful if you indicate what P level you are using for max pull. P0, P1, etc…